Search: 2009!2008|2007|2006 |20052004|2003|2002|2001| 2000|1999 | 1998 | 1997 | 1996 | 1995 | 1994 | 1993 | 1992 | 1991 | 1990 | 1989 | 1988 | 1987

113. Use of Mold Filling Simulations to predict Voids during Manufacturing of Composites with Liquid Molding Processes, DRDO, Pune,  India, Feb 23rd, 2009.

112. Keynote: S. G Advani and P. Simacek, "Role of Resin Flow Simulations in Liquid Composite Molding Processes," Polymer Processing Society, Goa,  India , March 1-5, (2009).

111. S. G. Advani and  P. Simacek,  Flow Simulation to Address Microvoids and Material Variability in Liquid Composite Molding (Invited), Materials Science and Technology Conference, October 5-9, Pittsburg, PA (2008) 

110. "Simulations for Liquid Molding.”  Distinguished Lecture Series, Florida State University, Nov. 2008.

109. “LIMS for use in Advanced Composites”  , Imperial College, London. 

108. “Introduction to Fuel Cells”, Presented at Solar Hydrogen and Sustainable Energy Conference, August 20-22, 2007, Newark, Delaware

107. S. G. Advani and  J.M. Lawrence, " Simulations for Design, Sensing and Control of Liquid Composite Molding Processes", 
International Forum on Textile Science and Engineering, Shanghai, China, November, 2006

106.Plenary Address: Multi-Scale Modeling in Liquid Composite Molding,
8th International conference on Flow Processes in Composites Manufacturing, Douai, France, July 10-13 (2006). 

105."Advances in Liquid Molding Simulations for Composite Processing," 
Imperial College, August (2006).

104. "Liquid Molding Simulations for Design, Control and Optimization of Composites,"
ASM/TMS Spring Symposium, May 22nd, 2006, GE Global Research Center, Niskayuna, NY

103. "Use of Simulations in Manufacturing of Composite Structures" 
      Industrial College of Armed Forces, 2006

102. "Role of Simulations in Composite Manufacturing: The Road Less Traveled,"
Inaugural Named Chair Lecture, University of Delaware, March 2006

101. "PEM Fuel Cells and Water Management"
Delaware Engineering Society, Dec 2005

100. "Permeability Characterization"
National Institute of Standards and Technology, Gaitersburg, Maryland

99." Composite Processing in Ship Structures"
Annual Meeting of Office of Naval Research, Baltimore, April 2005

98. "Mold Filling Simulations for Design and Optimization", 
Polymer Processing Society-21, Canada, August 2005

97. ""Role of Flow Simulation for Design, Optimization and Control of Liquid Composite Molding Processes"
Keynote ICCE-12, August 1-6, 2005 Tenerife, Canary Islands, Spain

96."Flow of Resin in Dual Scale Textiles"
Georgia Institute of Technology, Sept. 2004

95. "Manufacturing for Aerospace Structures,"
Airbus, Tolouse, France, August 2004

94. "Role of Modeling and Simulation in Liquid Molding,"
Imperial College, England, London, August 2004

93. Workshop on Liquid Molding Simulations
CANCOM, August 2004

92. "Predictive Models in Composite Molding Processes,"
NSF Workshop, June 2004

91."Flow and Rheology of Carbon Nanotubes in Shear Flow,"
NUMIFORM, Ohio, June 2004

90. Use of Flow Simulation for Design, Optimization and Control of Liquid Molding Process
Lehigh University, Bethelem, March 2004

89. "Workshop in Liquid Molding"
DRDO, Pune, India,  Jan. 2004

88. " Liquid Molding: From Simulation to Production"
University of Nottingham, England, UK, July 2003
87. "Role of Heat Transfer in Liquid Molding,"
Ecole Des Mines de Douai, France, July 2003

86. "Use of Simulation for Optimization and Control in Liquid Molding Processes"
University of Illinois, Urbana Champaign, September 2002
85. "Flow Modeling in Composites Processing,"
SAMPE, Baltimore, Sept. 2002
84. " Role of Racetracking in Textile Composites,"
TEXCOMP, Philadelphia, August 2002
83." Modeling and Simulation of Composite Manufacturing Processes"
BTL Regional College of Engineering, Bangalore, Jan. 2002

82. "Process Models in Liquid Molding"
Indian Institute of Science, Bangalore, INDIA, Jan. 2002
81.Heat Dispersion in Composites Processing
Plenary Speaker, Joint ASME/ISHMT Heat and Mass Transfer Conference, KolKutta, Jan 2002

80.Process Modeling, Simulation and Control in Liquid Molding
Indian Institute of Science, Bangalore, India, December, 2001

79.Modeling flow in Fiber Tows in Liquid Composite Molding
American Society of Mechanical Engineers, New York, November, 2001

78.Process Modeling in Composites Manufacturing
Université de Poitiers - Faculté des Sciences, FRANCE, August 2001

77.Modeling and Simulation in Liquid Composite Molding
Cranfield University, U.K., July 2001

76.Three Dimensional Flow Modeling and Simulation for Aerospace Structures”
BAE Systems research and Development, Bristol, U.K., July 2001

75.“Modeling and Control of Flow during Liquid Composite Mould Filling Processes” 
ACUN-3, Sydney, Australia, Feb 2000

74."Investigation of Heat Transfer during Laminar flow through Periodic Porous Media," 
4th ISHMT/ASME Heat and Mass Transfer Conference, Pune, India, Jan 2000

73. Keynote Address” Sensors and Simulation in RTM”
International Conference in Flow Process in Composite Materials
Plymouth, England, July 1999

72. “Solidification of Semi-Crystalline Polymers”
International Mechanical Engineering Congress & Exposition
Anaheim, CA, November, 1998

71. “Composite Hip Implant Studies”
International Mechanical Engineering Congress & Exposition
Anaheim, CA, November, 1998

70. “Permeability Studies in RTM”
University of Michigan, October, 1998

69. “Modeling Liquid Molding Processes”
Michigan State University, October, 1998

68. “Flow Visualization Studies in RTM”
Honeywell Corporation
Minneapolis, Minnesota, August, 1998

67. “Manufacturing with Composites”
High School Teacher’s Workshop
University of Delaware
Newark, DE, June, 1998

66. “Flow Issues in Resin Transfer Molding of Composites”
Gordon Conference on Composites
Ventura, Ca, Jan 8, 1998

65. Computational Issues in Simulation of Resin Transfer Molding Process
Invited Speaker in Symposium on Composites, IMECE
Dallas, Texas, Nov. 21, 1997

64. Panelist on “Unresolved Issues in Fluid Mechanics”
IMECE
Dallas, Texas, Nov. 21,1997

63. “Role of Micro-Macro Coupling in Solidification of Semi-Crystalline Polymers,”
Invited Speaker, IMECE 
Dallas, Texas, Nov. 20, 1997

62. “Role of Virtual Manufacturing in Resin Transfer Molding”
Invited Speaker, NSF Workshop on Future of Composites
Dearborn, Michigan, October 7th, 1997 

61. “Design of Heat Sink for Cooling of PTV systems”
Quantum Group Inc.
San Diego, CA, August 2, 1997

60. "Flow in Fiber Preforms"
Workshop on Manufacturing of Composites: Molding Processes
University of Delaware
Newark, May 24th, 1997

59. “Role of Process Modeling in Manufacturing of Composite Materials”
Planery Speaker, SAMPE 
Philadelphia, May 22, 1997

58. "Solidification in Semi-Crystalline Materials"
National Chemical Laboratory
Pune, India, Jan. 1997

57. "Flow in Fiber Preforms"
Workshop on Manufacturing of Composites: Molding Processes
Michigan State University
East Lansing, October 24th, 1996

56. "Process Models for Composites Fabrication", Plenary Lecture
Second Conference in NDE Applied to Process Control of Composite Fabrication, 
St. Louis, October 1, 1996.

55. "Draping of Fabrics" 
British Aerospace, Bristol, England, U.K. 
July 15th, 1996 

54. "Permeability of Preforms" 
DGA, Materials Division Paris, France 
July 10, 1996 

53. "Flow in Fiber Preforms"
Ohio State University
Columbus, Ohio, June 1996

52. "Simulation of Composite Manufacturing Processes" 
Georgia Tech., Mechanical Engineering, Atlanta, GA 
May 31st, 1996. 

51. "Flow of Resins in Stationary Fiber Beds" 
Los Alamos Research Laboratory, Los Alamos, NM 
March 25th, 1996 

50. "Solidifcation of Semi-Crystalline Polymers" 
Mathematical Sciences, University of Delaware, Newark, DE 
Feb 27th, 1996. 

49. "Simulations and Validation of the Resin Transfer Molding Process" 
Manufacturing Simulations Group, Army Research Laboratory, Aberdeen, MD 
Jan 22nd, 1996 

48. "Comparative Studies of Laminates Manufactured by Autoclave and RTM" 
North Carolina A & T, Greensboro, NC 
July 18th, 1995 

47. "Forming with Preforms" 
Workshop on Advanced Composites, Mechanical Engineering Department, MIT, Cambridge, MA 
July 11th, 1995 

47. "Flow and Heat Transfer in Resin Transfer Molding" 
Michigan State University and Univesity of Delaware Composites Workshop, Newark, DE, 
May 22, 1995. 

46. "Characterization of Permeability in Resin Transfer Molding" 
Department of Chemical Engineering, University of Laval Quebec City, Quebec 
March 23rd, 1995 

45. "Manufacturing with Resin Transfer Molding: Simulations and Experiments" 
Department of Mechanical Engineering, University of Minnesota, MN 
March 1st, 1995 

44. "Use of Process Simulation as Design Tools in Molding of Composites," 
Keynote Speaker, Computer Aided Design and Manufacturing, Polymer Processing and Rheology Society Meeting, Kyoto, Japan 
Sept. 29, 1994 

43. "Flow and Heat Transfer in Porous Media" 
Department of Mathematics, Newark, DE 
Sept. 15th, 1994 

42. "RTM: Flow and Heat Transfer" 
1994 CCM Composites Workshop, Newark, DE 
12 May 1994 

41. "RTM Simulation for Composites," 
British Aerospace Research Center, London, England, U.K. 
Jan 12th, 1994 

40. "Short Fiber Suspension Flows," 
Center for Composite Materials, Imperial College, London, England, U.K 
Jan 10th, 1994. 

39. "A Model for Thermoplastic Pultrusion," 
Composite Center, University of Kaisersaultern, Kaisersaultern, Germany 
Nov 26th, 1993 

38. "Resin Transfer Molding: Reality and Simulation," 
Composite Center, University of Kaisersaultern, Kaisersaultern, Germany 
Nov 26th, 1993 

37. "Flow in Anisotropic Porus Media" 
Department of Mechanical Engineering, Imperial College, London, England, U.K. 
Nov. 12th, 1993 

36. "Permeability Measurements in Resin Transfer Molding," 
 CFM International (Former SNECMA), Paris, France 
November 5, 1993 

35. "Short Fiber Composites for Implants," 
Polymer Science and Engineering Division, National Chemical Laboratories, Pune, India 
August 19, 1993 

34. "Non-isothermal Crystallization" 
Polymer Science and Engineering Division, National Chemical Laboratories, Pune, India 
August 12, 1993 

33. "Manufacturing of Short Fiber Composites," 
Department of Mechanical Engineering, University of Canterbury, Christchurch, New Zealand 
July 21, 1993 

32. "Process Modeling and Simulation of Resin Transfer Molding," 
Department of Chemical Engineering, University of Auckland, Auckland, New Zealand 
June 25, 1993 

31. "Behavior of Concentrated Fiber Suspensions," 
Department of Mechanical Engineering, University of Auckland, Auckland, New Zealand 
June 18, 1993 

30. "Flow and Heat Transfer in Composites Processing," 
Council for Scientific Research for New Zealand , Auckland, New Zealand 
June 1, 1993 

29. "A Process Model for Resin Transfer Molding," 
National Aeronautics and Space Administration, Langley Research Center, Hampton, VA. 
March 30, 1993 

28. "Consolidation and Void Compression in Thermoplastic Tow Placement," 
National Institute of Standards and Technology (Former NBS), Gaithersburg, MD 
March 29, 1993 

27. "Flow and Rheology of Non-Dilute Fiber Suspensions," 
Polymer Processing Institute, Stevens Institue of Tech., Hoebokin, NJ 
Dec 2, 1992 

26. "RTM: Flow Analysis in Complex Curvature Composite Parts," 
1992 CCM Composites Workshop Newark, DE 
19-21 May 1992 

25. "Bubble Growth in Polymeric Foams," 
Polymer Science and Engineering, National Chemical Laboratories, Pune, India 
April 3, 1992 

24. "Experimental Investigation of Solidification Front in Semi-Crystalline Materials," 
E. I. Dupont de Nemours and Co., Wilmington, DE 
Jan 21, 1992 

23. "Heat Transfer during Crystallization of Semi-Crystalline Polymers," 
Hoechst Celanese, Summit, NJ 
Sept. 27th, 1991 

22. "Computation Fluid Mechanics for Creeping Flows," 
Creare.x, Hanover, NH 
Aug. 26, 1991 

21. "Permeability Predictions during Resin Transfer Molding", 
Lockheed Aeronautical Systems Company, Marietta, GA 
June 21st, 1991 

20. "Resin Transfer Molding, Simulation and Analysis" 
1991 CCM Composites Workshop, Newark, DE 
22-24 April 1991 

19. "Composite Flow Processing" 
Hercules Research Center, Wilmington, DE 
March 21, 1991 

18. "Effective Flow Properties of Fiber Suspensions" 
Keynote: Society of Plastic Industries, Washington D.C. 
Feb 20, 1991 

17. "Flow through Anisotropic Porous Media" 
Steven's Institute of Technology, Hoboken, NJ 
Feb 6, 1991 

16. "Modeling and Simulation of Creeping flow through Fiber Beds" 
Tulane University, New Orleans, LA 
January 18,1991

15. Issues in Resin Transfer Molding 
ARO/URI Site Visit, University of Delaware, Newark, DE 
Dec 3, 1990 

14. RTM: Filling of Complex Three-Dimensional Shell-like Structures 
University of Nottingham, England, U.K.
August 29, 1990 

13. "Prediction of Fiber Orientation in Three-Dimensional Confined Geometries," HowMedica Corp, NJ 
August 2, 1990 

12. "Flow Analysis in Resin Transfer Molding" 
1990 CCM Composites Workshop, Newark, DE 
16-18 May 1990 

11. "Heat Flow During Crystallization" 
E. I. Dupont de Nemours and Co., Wilmington, DE 
December 8, 1989 

10. "Flow of Resin through Fiber Mats" 
Polymer Science and Engineering, National Chemical Laboratories, Pune, India 
June 12, 1989 

9. "Fiber Orientation Predictions in Flowing Suspensions" 
Cambridge University, Cambridge, England 
June 1, 1989 

8. "Injection Molding of Long Discontinuous Fibers" 
Imperial Chemical Industries, Wilton, England 
May 30, 1989 

7. "Liquid Molding and Fiber Suspensions" 
1989 CCM Composites Workshop, Newark, DE 
16-18 May 1989 

6. "Flow Modeling of Structural Foams" 
GE Corporate Research and Development, Schenectady, NY 
March 12, 1989 

5. "Flow of Fiber Suspensions," 
National Institute of Standards and Technology (Former NBS), Gaithersburg, MD 
Jan 23rd, 1989 

4. "Fiber Orientation Control in Compression Molding" 
USA-ITALY Joint Symposium on Composite Materials, Capri, Italy 
6-10 June 1988 

3. "Prediction of Fiber Orientation in Thin Compression Moldings" 
1988 CCM Composites Workshop Newark, DE 
17-19 May 1988 

2. "Flow of Fiber Suspensions" 
Mechanical Engineering Department, University of Massachusetts, Ahmerst, MA 
1987 

1. "Fiber Orientation in Compression Molding" 
Mechanical Engineering Department, MIT, Cambridge, MA 
1987