/ *****************************************************************
/ Disclaimer: This file was written by GAMBIT and contains
/ all the continuum and boundary entities and coordinate systems
/ defined in GAMBIT. Additionally, some frequently used FIPREP
/ commands are added. Modify/Add/Uncommment any necessary commands.
/ Refer to FIPREP documentation for complete listing of commands.
/ *****************************************************************
/
/          CONVERSION OF NEUTRAL FILE TO FIDAP Database
/
FICONV( NEUTRAL )
INPUT( FILE="cell-3D.FDNEUT" )
OUTPUT( DELETE )
END
/
TITLE
cell-3D
/
FIPREP
/
/          PROBLEM SETUP
/
PROBLEM (3-D, LAMINAR, NONLINEAR, ISOTHERMAL)
EXECUTION( NEWJOB )
PRINTOUT( NONE )
DATAPRINT( CONTROL )
/
/          CONTINUUM ENTITIES
/
ENTITY ( NAME = "fluid", FLUID, PROPERTY = "fluid" )
/
/          BOUNDARY ENTITIES
/
ENTITY ( NAME = "walls", PLOT )
ENTITY ( NAME = "inlet", PLOT )
ENTITY ( NAME = "outlet", PLOT )
/
/          LOCAL COORDINATE SYSTEMS DEFINED
/
/COORDINATE ( SYSTEM = 2, MATRIX,CARTESIAN )
/0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000 0.000000 0.000000 0.000000 1.000000
/
/          SOLUTION PARAMETERS
/
SOLUTION( SEGREGATED = 50, CR, CGS, VELCONV = .001, NCGC = 1.E-6, SCGC = 1.E-6, SCHANGE = .0 )
/PRESSURE( MIXED = 1.E-8, DISCONTINUOUS )
/RELAX( HYBRID )
/OPTIONS( UPWINDING, , , )
/SCALE( VALUE = 1 )
/TIMEINTEGRATION( BACKWARD,NSTEPS = ,DT = 0,,, )
/POSTPROCESS( NBLOCKS =  )
/
/          MATERIAL PROPERTIES
/
/ Partial list of Material Properties data
/
DENSITY( SET = "fluid", CONSTANT = 1 )
VISCOSITY( SET = "fluid", CONSTANT = 1 )
/CONDUCTIVITY( SET = "fluid", CONSTANT = 1 )
/SPECIFICHEAT( SET = "fluid", CONSTANT = 1 )
/
/          INITIAL AND BOUNDARY CONDITIONS
/
/ICNODE( , CONSTANT = 0, ALL )
/
BCNODE( VELO, CONSTANT = 0, ENTITY = "walls" )
BCNODE( UX, CONSTANT = 0.0, ENTITY = "inlet" )
BCNODE( UY, CONSTANT = 100.0, ENTITY = "inlet" )
BCNODE( UZ, CONSTANT = 0.0, ENTITY = "inlet" )
/BCNODE( , CONSTANT = 0, ENTITY = "outlet" )
/
END
/