1. Suranjan Roy Chowdhary, M.M.S.E. (1991) "Consolidation in Thermoplastic Matrix Composite Filament Winding" 

2. Sunil Gupte, M.M.E. (1991) "Numerical Modeling to Investigate the Role of Short Fiber Composites For Orthopedic Implants" 

3. Tomas Sadiq, M.M.E. (1992) "An Experimental Investigation of Transverse Permeability for Idealized Porous Beds of Aligned Array of Cylinders" 

4. Ann Krach, M.M.E. (1994) " Effective Thermal Conductivity of Carbon-Carbon Composites with Varying Parameters of Porosity, Matrix Conductivity and Anisotropy" 

5. Kelli Burget, M.M.E. (1994) " An Investigation of Fiber Wall Interactions in Shear Flows" 

6. Wei Zhang, M.M.E. (1994) "Dispersion of Heat in Resin Transfer Molding" 

7. Yves de Parseval, M.M.E. (1995) "Experimental and Analytic Methods for the Characterization of Permeability of Fiber Preforms" 

8. Tom Luce, M.M.E. (1995) "An Experimental Investigation of the In-Situ-in-plane and Transverse Permeabilities of Fiber Preforms" 

9.Jeff Mogavero, M.M.E. (1996), "Compression Characterization and Resin Infiltration of Multi-Layered Preforms in Resin Transfer Molding".

10. Susan Kirschner, M.M.E. (1997), "Experiments in the Unsteady Fluid Dynamics of Expanding, Immiscible, Viscous Droplets in a Radial Hele-Shaw Cell".

11. Maylene Hugh, M.M.E. (1997), "A study of the processing and properties for unidirectional and woven composites manufactured by the dry polymer powder prepregging method".

12. Emanuele Gillio, M.M.E. (1998), (Co-Advisors: Bruce Fink, ARL, & Jack Gillespie, Materials Science and Civil Engineering), "Co-injection Resin Transfer Molding of Hybrid Composites".

13. Hans Laudorn, M.M.E. (1998), “Experimental Investigation of Heat Dispersion in Fibrous Porous Media”.

14. Jeremiah Slade, M.M.E. (1999), "Experimental Investigation of Preform Deformation and Permeabilities in Woven Preforms".

15. William Ballata, M.M.E. (1999), "Effect of Flow Parameters and Preform Architecture on the Saturation of Dual Scale Porous Media".

16. Sunil Earath, M.M.E. (1999), (Co-Advisor: Ajay Prasad, Mechanical Engineering), “Design and Optimization of Micro Cooling Channels for TPV”.

17. Rajitha Alagu, M.M.E (2000) (Co-advisor: Mike Keefe, Mechanical Engineering), “Parametric Studies of Photo Sensitive Injection Molding”

18. Nikhil Prabhu, M.M.S.E (2000) (Co-advisor J. Schultz) "Role of Coupling the Microscopic and  Macroscopic Phenomena during the Crystallization of Semi-crystalline Materials”

19. Hubert Stadtfeld, M.M.E (2000) (Co-Advisor: Karl Steiner, CCM), Experimental Validation Of Impregnation Schemes With Control Strategies In Liquid Composite Molding Processes”.

20. Shawn Riley, M.M.E(2001) “New Design Studies of Hip Prosthesis” (Co-Advisor: Mike Santare)

21. Jeff Acheson, M.M.E. (2002)“The role of vacuum pressure, dual scale media, and fiber compaction in VARTM” (Co-Advisor: Jack Gillespie)

22. Pavel Nedanov, M.M.E. (2002), “ Permeability characterization of fibrous porous media”.

22. Gonzalo Estrada (2002) “Role of Binders and Compaction on Permeability of Fabrics”

23. Mylene Deligise ( 2002) “Analysis and Experiments to Measure Temperatures in Non-Isothermal Mold Filling” 

24. Mathieu Devillard, (2003), " Validation and Implementation of Control Strategies for Liquid composite Molding Processes"

25. Dhiren Modi, (2003) "Numerical Issues in Mold Filling Simulations for Composites Processing"

26. Joesph Feser, (2005) (Co-Advisor: Ajay Prasad), "Convective  Flow Through Polymer Electrolyte Fuel Cells,"

27. Nina Kuentzer, (2006), "Characterization and Effects of Dual Scale Permeability in Fibrous Porous Media"

28. Mourad Chohra (Expected-2005), "Modeling flow on Particle Loaded Suspensions in Dual Scale Porous Media,"

29. Charlotte Corlay (Expected-2006), " Understanding Heat Damage in Polymer Composites,"

30. Justin Alms (Expected-2006), " Introducing Automated Flow Manipulation in Resin Transfer Molding Process,"

31. Allison Bruton (Expected 2006), (Co-Advisor Mike Santare)" Manufacturing HDPE Nanocomposites for Iimproving Wear Properties,"