131. |
Invited Presentations
Search:2015 2014|
2013| 2012|2011| 2010|||2009!2008|2007|2006
|20052004|2003|2002|2001|
2000|1999
| 1998 | 1997 |
1996
| 1995 |
1994 | 1993
| 1992 | 1991 |
1990
| 1989 | 1988 |
1987
139.
“Fuel Cell Bus Program at University of
Delaware, “,Center for Transportation and the Environment,
Atlanta, GA, April
23, 2015.
136.
“A Viscoelastic Model to Improve Computations in Liquid
Molding Processes,” Special Symposium in honor of Roger
Tanner, Samos, Greece, June 29th to July 3rd, 2015. 135.
“Permeability Characterization of 3D Fabrics,”
University of Nottingham, England, U.K., July, 2015.
133.
"New role of modeling and simulation in
advancement of composite manufacturing with liquid
molding," 30th
International Conference of the Polymer Processing Society
(PPS-30), Cleveland,
Ohio, June 8-12, 2014
127. “Modeling and Simulation of Composite Manufacturing
Processes,” General Electric Research Center, NY, April
2013
124. "Intelligent Process Control in Liquid
Molding," Office of Naval Research, Caderock,
Virginia, August 2012
122. Role of Modeling and Process Simulation on the Path towards Reliability and Automation in Advanced Composites Manufacturing,, Bristol University, Bristol, England, U.K. (August 2011) 121. Process Modeling in Liquid Composite Molding, University of Nantes, Nantes, France (August 2011) 120. Permeability Analysis in Composites and Fuel Cells, University of California, Davis, May (2011) 119.. Modeling Liquid Composite Molding Processes, United
Technologies
United Technologies Research Center, East Hartford, CT
06108 , April (2011).
117. Composites Processing and Models ETH, Zurich, Switzerland, July 2010 116. Keynote: S. G Advani and P. Simacek, "Role of Resin
Flow Simulations
in Textile Preforms" TEXCOMP, France, October (2010)
114. Keynote: S. G. Advani and Pavel Simacek, � Recent Advances and Future Outlook in Liquid Molding in Composites Processing, July 27-31 2009, ICCM-17, Edinburgh, Scotland. 113. Use of Mold Filling Simulations to predict Voids during Manufacturing of Composites with Liquid Molding Processes, DRDO, Pune, India, Feb 23rd, 2009. 112. Keynote: S. G Advani and P. Simacek, "Role of Resin
Flow Simulations
in Liquid Composite Molding Processes," Polymer Processing
Society, Goa,
India , March 1-5, (2009).
110. "Simulations for Liquid Molding.� Distinguished Lecture Series, Florida State University, Nov. 2008.
108. �Introduction to Fuel Cells�, Presented at Solar Hydrogen and Sustainable Energy Conference, August 20-22, 2007, Newark, Delaware 107. S. G. Advani and J.M. Lawrence, " Simulations
for Design,
Sensing and Control of Liquid Composite Molding
Processes",
106.Plenary Address: Multi-Scale Modeling in Liquid
Composite Molding,
105."Advances in Liquid Molding Simulations for Composite
Processing,"
104. "Liquid Molding Simulations for Design, Control and
Optimization
of Composites,"
103. "Use of Simulations in Manufacturing of Composite
Structures"
102. "Role of Simulations in Composite Manufacturing: The
Road Less
Traveled,"
100. "Permeability Characterization"
99." Composite Processing in Ship Structures"
98. "Mold Filling Simulations for Design and
Optimization",
97. ""Role of Flow Simulation for Design, Optimization
and Control of
Liquid Composite Molding Processes"
95. "Manufacturing for Aerospace Structures,"
94. "Role of Modeling and Simulation in Liquid Molding,"
93. Workshop on Liquid Molding Simulations
92. "Predictive Models in Composite Molding Processes,"
91."Flow and Rheology of Carbon Nanotubes in Shear Flow,"
90. Use of Flow Simulation for Design, Optimization and
Control of Liquid
Molding Process
89. "Workshop in Liquid Molding"
82. "Process Models in Liquid Molding"
79.Modeling flow in Fiber Tows in Liquid Composite
Molding
78.Process Modeling in Composites Manufacturing
77.Modeling and Simulation in Liquid Composite Molding
76.Three Dimensional Flow Modeling and Simulation for
Aerospace Structures�
75.�Modeling and Control of Flow
during Liquid Composite
Mould Filling Processes�
74."Investigation of Heat Transfer during Laminar flow
through Periodic
Porous Media,"
73. Keynote Address� Sensors and
Simulation in RTM�
72. �Solidification of
Semi-Crystalline Polymers�
71. �Composite Hip Implant Studies�
70. �Permeability Studies in RTM�
69. �Modeling Liquid Molding Processes�
68. �Flow Visualization Studies in RTM�
67. �Manufacturing with Composites�
66. �Flow Issues in Resin Transfer Molding of Composites�
65. Computational Issues in Simulation
of Resin Transfer
Molding Process
64. Panelist on �Unresolved Issues in Fluid Mechanics�
63. �Role of Micro-Macro Coupling in Solidification of
Semi-Crystalline
Polymers,�
62. �Role of Virtual Manufacturing in Resin Transfer
Molding�
61. �Design of Heat Sink for Cooling of PTV systems�
60. "Flow in Fiber Preforms"
59. �Role of Process Modeling in Manufacturing of
Composite Materials�
58. "Solidification in Semi-Crystalline Materials"
57. "Flow in Fiber Preforms"
56. "Process Models for Composites Fabrication", Plenary
Lecture
55. "Draping of Fabrics"
54. "Permeability of Preforms"
53. "Flow in Fiber Preforms"
52. "Simulation of Composite Manufacturing
Processes"
51. "Flow of Resins in Stationary Fiber Beds"
50. "Solidifcation of Semi-Crystalline Polymers"
49. "Simulations and Validation of the Resin Transfer
Molding Process"
48. "Comparative Studies of Laminates
Manufactured
by Autoclave and RTM"
47. "Forming with Preforms"
47. "Flow and Heat Transfer in Resin Transfer
Molding"
46. "Characterization of Permeability in Resin Transfer
Molding"
45. "Manufacturing with Resin Transfer Molding:
Simulations and Experiments"
44. "Use of Process Simulation as
Design Tools in
Molding of Composites,"
43. "Flow and Heat Transfer in Porous Media"
42. "RTM: Flow and Heat Transfer"
41. "RTM Simulation for Composites,"
40. "Short Fiber Suspension Flows,"
39. "A Model for Thermoplastic
Pultrusion,"
38. "Resin Transfer Molding: Reality and
Simulation,"
37. "Flow in Anisotropic Porus Media"
36. "Permeability Measurements in Resin Transfer
Molding,"
35. "Short Fiber Composites for Implants,"
34. "Non-isothermal Crystallization"
33. "Manufacturing of Short Fiber Composites,"
32. "Process Modeling and Simulation of Resin Transfer
Molding,"
31. "Behavior of Concentrated Fiber Suspensions,"
30. "Flow and Heat Transfer in Composites
Processing,"
29. "A Process Model for Resin Transfer Molding,"
28. "Consolidation and Void Compression in Thermoplastic
Tow Placement,"
27. "Flow and Rheology of Non-Dilute
Fiber Suspensions,"
26. "RTM: Flow Analysis in Complex Curvature Composite
Parts,"
25. "Bubble Growth in Polymeric Foams,"
24. "Experimental Investigation of Solidification Front
in Semi-Crystalline
Materials,"
23. "Heat Transfer during
Crystallization of Semi-Crystalline
Polymers,"
22. "Computation Fluid Mechanics for Creeping
Flows,"
21. "Permeability Predictions during Resin Transfer
Molding",
20. "Resin Transfer Molding, Simulation and
Analysis"
19. "Composite Flow Processing"
18. "Effective Flow Properties of Fiber
Suspensions"
17. "Flow through Anisotropic Porous Media"
16. "Modeling and Simulation of Creeping flow through
Fiber Beds"
15. Issues in Resin Transfer
Molding
14. RTM: Filling of Complex Three-Dimensional Shell-like
Structures
13. "Prediction of Fiber Orientation in Three-Dimensional
Confined Geometries,"
HowMedica
Corp, NJ
12. "Flow Analysis in Resin Transfer Molding"
11. "Heat Flow During
Crystallization"
10. "Flow of Resin through Fiber Mats"
9. "Fiber Orientation Predictions in Flowing
Suspensions"
8. "Injection Molding of Long Discontinuous Fibers"
7. "Liquid Molding and Fiber Suspensions"
6. "Flow Modeling of Structural Foams"
5. "Flow of Fiber Suspensions,"
4. "Fiber Orientation Control in
Compression Molding"
3. "Prediction of Fiber Orientation in Thin Compression
Moldings"
2. "Flow of Fiber Suspensions"
1. "Fiber Orientation in Compression Molding"
|
|