| Conference Presentations
Search: 2011|2010||2009|2008|2007|2006|2005
|2004|2003|2002|
2001|
2000|
1999
| 1998 | 1997 | 1996
| 1995 | 1994 | 1993
| 1992 | 1991 | 1990
232.. J.J. Gangloff Jr., S.G. Advani, University of Delaware and S. Sinha, GE Global Research, "A Model for Tow Impregnation and Consolidation for Partially Impregnated Thermoset Prepregs, SAMPE Conference & Exposition, Long Beach, CA . May 23-26, 2011. 231. T.A. Cender, A. Abu-Obaid, P. Simacek, S.G. Advani , “Experimental Characterization of a Partially Pre-Impregnated Fabric for Out-of-Autoclave Processing, SAMPE Conference & Exposition, Long Beach, CA . May 23-26, 2011. 230. Pavel Simacek and Suresh G. Advani, “Modeling And Simulation of Nonisothermal Reactive Resin Flow In Liquid Composite Molding” ICCM-18 Jeju Island, South Korea, August (2011). 229.. Wook Ryol Hwang and Suresh Advani, “Orientation Prediction Of Carbon Nanotubes In Dual-Scale Porous Media During Resin Infusion,” ICCM-18, Jeju Island, South Korea, August (2011). 228.. Matt Lindemer, Ajay Prasad and Suresh G. Advani, “Characterization of Vortex Flow in a Reactor for Solar Thermochemical Cycles, “ Energy and Sustainability Conference, Newark, DE, Sept 2011. 227.. Matt Lindemer, Ajay Prasad and Suresh G. Advani, “Visualization and characterization of auxilliary vortex flow in a novel, axisymmetric solar thermochemical reactor, ASME winter Annual Meeting in Denver, CO. Nov. 2011. 226.. John Gangloff, Shatil Sinha, Pavel Simacek, Suresh G. Advani. “ A Model for Wrinkle Compaction in Thermoset Prepreg Processing, “Proceedings of the 26th ASC Annual Technical Conference, September 26, 2011. 225.. L. Wang, Suresh G. Advani and Ajay K. Prasad, “Freeze-Thaw Durability Study of MWCNTs Nafion Reinforced Membranes,” earned first place at the 2011 International Fuel Cell Seminar and Exposition. 224. . Erik Koepf, Suresh G. Advani Ajay K. Prasad, “Design Of
A Novel High Temperature Gravity-Fed Solar Thermochemical Reactor For Solar-Fuels
Production: Case Study - Zno Powder, Proceedings of the 5th International
Conference on Energy Sustainability, ASME ES2011, August 7-10, 2011, Washington
DC, USA
223. P. Bubna, D. Brunner, S.G. Advani, A.K. Prasad, "The University of Delaware Fuel Cell Bus Program," presented at the EDTA Conference & Exposition 2010, Washington DC, Jan. 2010. 222. Vasan Chandrasekaran, Michael H. Santare and Suresh G. Advani, “Interlaminar Shear Strength Enhancement of Glass Fiber/Epoxy/Multiwalled Carbon Nanotube Hybrid Composites,” ASC and US-Japan Conferences: September 20-22, 2010 ASTM-D30 Meeting: September 22-23, 2010, Dayton Marriott, Dayton, Ohio 221. Pavel Simacek and Suresh G. Advani, “Modeling the Resin Flow of Reactive Resins in Liquid Composite Molding,” Flow Processes in Composite Manufacturing, Ascona, Switzerland, July (2010). 220. Wook Ryol Hwang and Suresh Advani, “Permeability predictions of dual scale fabrics using level set methods,” Flow Processes in Composite Manufacturing, Ascona, Switzerland, July (2010). 219. Martinez, F., Simacek, P., & Advani, S. G. (2010). “Comparison of modeling approaches to resin flow simulation in layered draped textile preforms.” Recent Advances in Textile Composites: Proceedings of the 10th International Conference on Textile Composites, 463-471, Lillee, France (October 2010). 2009
217. Vasan Chandrasekaran, Michael H. Santare and Suresh G. Advani, “Role of Processing on Interlaminar Shear Strength Enhancement of Glass Fiber/Epoxy/Multiwalled Carbon Nanotube Hybrid Composites,” American Society for Composites, 24th Technical Conference and the Canadian Association for Composite Structures and Materials, September 15-17, University of Delaware (2009) (also a proceedings paper). 216. Pavel Simacek and Suresh G. Advani, “Process Variability in Liquid Composite Molding and It’s Implications for Predictive Modeling,” American Society for Composites, 24th Technical Conference and the Canadian Association for Composite Structures and Materials, September 15-17, University of Delaware (2009). . 215. Claire Steggall, Shawn Walsh, Suresh G. Advani, and Shridhar Yarlagadda,” Energy Absorption In Powder-Impregnated Composites With Varied Void Fraction,” SAMPE: Baltimore, Maryland, May 18-21, 2009. 214. Valentin. Neascu, Lian-Ping Wang and Suresh G. Advani,” Lattice Boltzmann Method And Saturation Of Fiber Tows,” SAMPE: Baltimore, Maryland, May 18-21, 2009. 213. Pavel Simacek and Suresh G. Advani,” Risk Mitigation With Liquid Molding Process Simulation,” SAMPE: Baltimore, Maryland, May 18-21, 2009. 212. . Hoellhoffer, Jenny Mueller, John W. Gillespie, Suresh G. Advani and Travis Bogetti,” Role Of Friction In Ultrasonic Consolidation During Processing Of Metal Matrix Composites,” SAMPE: Baltimore, MD, May 18-21, 2009. 211. J. B. Alms, J. L. Glancey, and Suresh. G. Advani,” Sequential Injection Using A Gantry Positioning System For Flow Control In Vacuum Resin Infusion Processes,” SAMPE: Baltimore, Maryland, May 18-21, 2009. 210. F-Y. Zhang, S. Advani, A. Prasad, T. Beebe, Z. Khalifa, S. Shah, “Investigation of freeze/thaw effects on catalyst layer degradation in fuel cells with XPS and XRD,” 209. K. Palanichamy, S. G. Advani, A. K. Prasad,” Magneli Phase TinO2n-1 as Corrosion-Resistant PEM Fuel Cell Catalyst Support,” Fuel Cell Seminar & Exposition, Palm Springs, CA, Nov 16-19 (2009). 208. Srikanth Arisetty, Suresh G. Advani, Ajay K. Prasad, and Ulrike Krewer, " Cathode Potential of DMFC: Kinetics and Mass Transfer ", 7th International ASME Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, Newport Beach, California, June 8-10, 2009. 207. P. Bubna, D. Brunner, S.G. Advani, A.K. Prasad, “The University of Delaware Fuel Cell Bus Program,” presented at the EDTA Conference & Exposition 2010, Washington DC, Jan. 2010. 2008
205. Valentin Neacsu, L.P. Wang and S.G. Advani, “Lattice Boltzmann Method for Microflow Analysis in Liquid Composite Molding,” 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada, July 8-10 2008. 204. Claire Steggall, Pavel Simacek, Suresh G. Advani, and Shridhar Yarlagadda, “A Model for Thermoplastic Melt Impregnation of Fiber Bundles During Consolidation of Powder-Impregnated Continuous Fiber Composites,” 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada, July 8-10 2008. 203. Jeffrey Lawrence, S. T. Holmes, M. Louderback, P. Simaceck, S .G. Advani,, “The Use of Flow Simulations of Large Complex Composite Components Using the VARTM Process,” 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada, July 8-10 2008. (also a proceedings paper) 202. Justin B. Alms, James L. Glancey, and Suresh G.Advani,” An Experimental Approach to Port-Based Injection in Vacuum Infusion Processing,” 9th International Conference in Flow Processes in Composite Materials, Montreal, Canada, July 8-10 2008. (also a proceedings paper) 201. K. Palanichamy, A. Prasad and S. Advani, “Off-Line Conditioning of PEM Fuel Cell Membrane Electrode Assembly (MEA), 214 ECS Meeting, Honolulu, Hawaii, October 12-17, 2008. 200. Srikanth Arisetty, Suresh G. Advani, Ajay K. Prasad, Cedric A. Jacob"Optimal Methanol Feed Concentration for DMFCs using Feedback from Voltage Measurements", 6th International ASME Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, Denver, CO, June 16-18, 2008, 199. Spernjak D., Advani S., Prasad A.K., "Experimental Comparison of Water Dynamics in PEM Fuel Cells with Different Flow Fields using Simultaneous Neutron and Optical Imaging", 6th International ASME Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, Denver, CO, June 16-18, 2008, 198. Pavel Simacek, Prabhas Bhat, Timo Gebauer and Advani S.G., “Predictive Modeling of Composite Molding Processes: Simulation of Compression-Resin Transfer Molding Process for Manufacturing Net Shape Structures”, Presented at CMMI Engineering Research and Innovation Conference 2008, Knoxville, TN, 2008 (also a proceedings paper) 197. J. B. Alms, J. L. Glancey, and S. G. Advani,” Experimental Determination of Permeability of Woven Fiber Glass During the Vacuum Induced Preform Relaxation (VIPR) Process,” Texcomp9, 9th international conference on Textile Composites, Newark, DE 19716, October 13-15 (2008). (also a proceedings paper) 196. Claire Steggall, Pavel Simacek, Suresh G. Advani, and Shridhar Yarlagadda,” A Model to Describe Thermoplastic Resin Impregnation in a Unit Cell of a Fiber Tow Within a Textile Preform,” Texcomp9, 9th international conference on Textile Composites, Newark, DE 19716, October 13-15 (2008). (also a proceedings paper) 195. V. C. S. Chandrasekaran, M. H. Santare, and S. G. Advani,” Pseudo Reinforcement Effect of Multiwalled Carbon Nanotubes In Epoxy/Glass Fiber Hybrid Composites,” Texcomp9, 9th international conference on Textile Composites, Newark, DE 19716, October 13-15 (2008). (also a proceedings paper) 194. V. Neacsu, J.M. Lawrence, S.G. Advani, “Influence of Flow on Preform Saturation and Microvoids in Liquid Composite Molding,” SAMPE: Long Beach, CA, May 18-22, 2008. (also a proceedings paper) 193. J..B. Alms, J.L. Glancey, S.G. Advani,, “Experimental Validation of a Port Based Injection Methodology for Vacuum Infusion Processes,” SAMPE: Long Beach, CA, May 18-22, 2008. (also a proceedings paper) 192. C. Steggall, S.G. Advani, S. Yarlagadda, “Mechanical Properties and Energy Absorption of Powder-Impregnated Continuous Fiber Thermoplastic Matrix Composites” SAMPE: Long Beach, CA, May 18-22, 2008. (also a proceedings paper) 191. P. Bubna, D. Brunner, S.G. Advani, A.K. Prasad, “The University of Delaware Fuel Cell Bus Program,” presented at the EDTA Conference & Exposition 2008, Washington DC, December 2-4, 2008 190. Feng-Yuan Zhang, Suresh G. Advani, Ajay K. Prasad, Mary Boggs, Shawn Sullivan, and Thomas P. Beebe, Jr. “Quantitative Characterization of PEM Fuel Cell Catalyst Layers Using XPS ”, 8th ANNUAL ACS-DELAWARE SECTION MEETING, Newark, April 30, 2008. (1st place prize)* 2007
188. Spernjak D., Suresh G Advani., Prasad A.K., "Investigation of Water Dynamics in an Operational PEM Fuel Cell Using Simultaneous Optical and Neutron Imaging", 212th Electrochemical Society Meeting, , October 7-12, 2007, Washington DC 187. Arisetty S., Spernjak D., Prasad A.K., Advani S.G. "Water and Methanol Crossover in Direct Methanol Fuel Cells", , 5th International ASME Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, June 18-20, 2007, New York, NY 186. Spernjak D., Advani S., Prasad A.K., "Simultaneous Neutron Imaging and Direct Visualization of Water Dynamics in a PEM Fuel Cell", 5th International ASME Conference on FUEL CELL SCIENCE, ENGINEERING and TECHNOLOGY, June 18-20, 2007, New York, NY. 185. Zhang F. Y., Prasad A.K., and Advani S.G., “Development of a Novel Metallic Gas Diffusion Layer for PEM Fuel Cells Using Micro/Nano Technology”, Presented at 2007 Fuel Cell Seminar & Exposition, October 15–19, 2007, San Antonio, Texas. 184. Zhang F. Y., Prasad A.K., and Advani S.G., “Development of a Nano-based Metallic Gas Diffusion Layer for Fuel Cells”, Presented at Solar Hydrogen and Sustainable Energy Conference, August 20-22, 2007, Newark, Delaware. 183. Zhang F. Y., Prasad A.K., and Advani S.G., “Combined Investigations of Catalyst Layer of PEM Fuel Cells with XPS and Micro Visualization,” Presented at 5th International ASME Fuel Cell Science, Engineering & Technology Conference, June 18-20, 2007, New York. 182. Brown D., Brunner D., Alexander M., Advani S.G., Prasad A.K., "Simulation and optimization of a PEM fuel cell hybrid transit bus on the University of Delaware Campus," presented at The Fifth International ASME Conference on Fuel Cell Science, Engineering and Technology, June 18-20, 2007, Brooklyn, New York. 181. J.Alms, J. Lawrence, A.Catry, J.Glancey and S.G. Advani, “Resin delivery and control workstation for VARTM,” The sixth Canadian Composites Conference (CANCOM), Winnipeg, Canada, August 2007. 180. J.M. Lawrence, V. Neacsu, S.G. Advani , “Modeling the Impact of Capillary Pressure and Air Entrapment on Fiber Tow Saturation During Resin Infusion in LCM,” SAMPE: Baltimore, June 7-10, 2007. 179. C. Steggall, S. Yarlagadda, S.G. Advani,,” Effects of Pressure and Time on Fiber Bundle Impregnation in Powder-impregnated Thick Section Thermoplastic Composites,” SAMPE: Baltimore, June 7-10, 2007. 178. J. Alms, P. Simacek, S.G. Advani, “Quantitative Approach to Determine Bleeding Time for Complete Tow Saturation,” SAMPE: Baltimore, June 7-10, 2007. (also a proceedings paper) 177. J. M. Lawrence, P. Simacek and Suresh G. Advani, “New Features in Liquid Composite Molding Simulation to Address Modern Processing Methods”, 28th International Conference on Composite Materials, JEC 2007, Paris April 2007. 176. P. Simacek, S.G. Advani , “Modeling and Simulation of Resin Flow in Resin Infusion Processes such as VARTM, VAP and Compression RTM,” Technical Meeting, SAMPE, Dallas, Nov 6-9, 2007. [175] Zhang FY, Spernjak D, Prasad AK, and Advani SG, "In-situ Micro/Nano Transport Characterization on Catalyst Layer in a PEM Fuel Cell," 2006 Fuel Cell Seminar, November 13-17, Honolulu, HI. [174] Arisetty S, Prasad AK, and Advani SG, "Direct Methanol Fuel Cell for Multifunctional Composites," 2006 Fuel Cell Seminar, November 13-17, Honolulu, HI. [173]. Spernjak D., Advani S.G., Prasad A.K., “Experimental investigation of liquid water formation and transport in a transparent single-serpentine PEM fuel cell,” presented at the Fourth International ASME Conference on Fuel Cell Science, Engineering and Technology, June 19-21, 2006, Irvine CA. [172]J.M. Lawrence, P. Simacek and S.G. Advani, “New Advances in Modeling
and Simulation
[171]N. Kuentzer, P. Simacek, S. Walsh and S.G. Advani, “Modeling and Simulation of Dual Scale Flow in Woven or Stitched Preforms in Liquid Molding Processes” SAMPE 2006: Creating New Opportunities for the World Economy, Long Beach, CA, April 30 – May 4, 2006. [170]P. Simacek and S.G. Advani, “Modeling and Simulation of Resin Flow
in Resin Infusion Processes such as VARTM, VAP and Compression RTM,” SAMPE
Fall Technical Conference
[169]Suresh G. Advani, Fuping Zhou and Pavel Simacek, "Predictive Modeling of Composite Molding Processes: Simulation of Compression-Resin Transfer Molding Process for Manufacturing Net Shape Structures," 2006 NSF Design, Service and Manufacturing Grantees and Research Conference, Saint Louis, Missouri July (2006) [168]J. M. Lawrence, A.A. Obaid, S. Yaralagadda, J.W. Gillespie and Suresh G. Advani, “Processing and Properties of Embedded Metals in Composite Glass-Vinyl ester Composite Structures,” Advanced Materials Conference: Ship and Ground Vehicle Applications, Baltimore, MD, 2006 [167]J.M. Lawrence, P. Simacek and Suresh G. Advani , “The Compression Resin Transfer Molding Process For Automotive Composite Components”, American Society for Composites 21tst Annual Technical Conference, Dearborn, MI, September 17-20, 2006 [166]Jeffrey M. Lawrence, Pavel Simacek, Susanna Laurenzi, Suresh G. Advani, “Flow Modeling of the Compression Resin Transfer Molding Process” Proceedings of the 8th International conference on Flow Processes in Composites Manufacturing,” Douai, France, July 10-13 (2006). [165] Valentin Neacsu, Suresh G. Advani and Johannes Leisen, “Investigation of Capillary Flow Across a Bank of Aligned Fibers” Proceedings of the 8th International conference on Flow Processes in Composites Manufacturing,” Douai, France, July 10-13 (2006). 2005
[163] With Gokce, A., A. Abu Obaid, and S. Yarlagadda, “Manufacturing and Structural Performance of Composites with Interlaminar Inserts using VARTM,” SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005 . [162] With Neacsu, V. and, A. Abu Obaid, “Role of Capillarity in Fiber Tow Impregnation During Composites Processing” SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005 . [161] With Gokce, A., , “Permeability Estimation Algorithm to Predict the Permeability of the Distribution Media in VARTM,” SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach, CA, May 1-5, 2005 . [160] With . Lawrence, J. M., P. Hughes, and S. G. Advani, “Dependence
Map Based Control of Mold Filling in Liquid Composite Molding,” Proceedings
of the SAMPE 2005 Symposium & Exhibition (50 th ISSE), Long Beach,
CA, May 1-5, 2005
[158] With Jeffrey M. Lawrence, “On-Line / Off-Line Control of Mold Filling in Liquid Composite Molding” FPCM 7, Newark, DE 2004 [157] With Jeffrey M. Lawrence “From Simulation to Production: Resin Transfer Molding for use in Intelligent Manufacturing of Composite Components”, SAMPE Long Beach 2004 [156] With Simacek, P., Gokce, A., Devillard, M., “Use of Mold Filling Simulations for Process Control and Automation in Liquid Composites Molding 25th Jubilee International SAMPE Europe Conference 2004, Paris France [155] With Simacek, P., Advani, S.G., “Role of Filling Simulation in LCM Process Design,” FPCM7 International Conference on Flow Processes in Composite Materials, Newark, DE [154] With Zuzana Dimitrovová, “Numerical Method to Predict Void Formation During the Liquid Composite Molding Process,” FPCM7 International Conference on Flow Processes in Composite Materials, Newark, DE [153] With J. H. Lee and L. Lin “ Preparation Of Clay/Glass Fiber/Epoxy Hybrid Nanocomposites Using VARTM,” FPCM7 International Conference on Flow Processes in Composite Materials, Newark, DE [152] With W. Engelbart, M. P. Renieri, L. E. Pado, M. L. Vandernoot
and P. Simacek,
[151] With B. B. Johnson, M. H. Santare and J.E. Novotny, “ Manufacturing and Performance of Carbon Nanotube/High Density Polyethylene Composites,” FPCM7 International Conference on Flow Processes in Composite Materials, Newark, DE [150] With B. B. Johnson, M. H. Santare and J.E. Novotny, “ Wear and Fracture of Carbon Nanotube/High Density Polyethylene Composites,” ASME Conference, Anaheim California,2004 [149] With Zhihang Fan, Wenzhong Tang and Kuang-Ting Hsiao, “Flow and
Dispersion of Multiwalled Carbon Nanotubes in Polymer and Fiberglass Reinforced
Polymer Composites,” NSF Grantees Conference (2004).
[148] With M. Devillard, K.T. Hsiao, S.G. Advani, “Validation and implementation of control strategies for liquid composite molding processes,” 2003 ASME International Mechanical Engineering Congress and RD&D Expo Washington D.C., USA, November 15-21 (2003) [147] With Fuping Zhou and Eric D. Wetzel, "Characterization of the Viscous Behavior of Compacted Ceramic Particles under Shear and Pressure Loads," ASME International Mechanical Engineering Congress and RD&D Expo Washington D.C., USA, November 15-21 (2003 [146]. With Jeffrey M. Lawrence and Mathieu Devillard, “An Approach To Couple Mold Design And On-Line Control To Manufacture Complex Composite Parts By Resin Transfer Molding”, Annual Technical Conference - ANTEC, Society of Plastic Engineers, 2003. [145] With Jeffrey M. Lawrence, Mathieu Devillard and Ali Gokce, “Intelligent Manufacturing During The Resin Transfer Molding Process To Increase Yield” ICCM-14, San Diego, CA, July 16, 2003 . [144] With Pavel Simacek, “Role of Simulations in Processing and Control”, CACUM, Canada (2003). [143] With Pavel Simacek, “Simulations and Modeling in Composites Processing,” ASC Meeting, Florida (2003). [142]. With Simacek, “Simulation of Liquid Molding Processes,” 2003 ASME International Mechanical Engineering Congress and RD&D Expo Washington D.C., USA, November 15-21 (2003) [141]. With M. H. Santare and J. Novotny, “Processing and Wear
Properties of HDPE/Carbon Nanotubes” 2003 ASME International Mechanical
Engineering Congress and RD&D Expo Washington D.C., USA, November 15-21
(2003)
2002
[139] With Mathieu Devillard, Ali Gokce and K. T. Hsiao , "Addressing Flow Variations Due To Imperfect Fit Between Preform Edges And The Mold Walls In Resin Transfer Molding Process, Texcomp6, Philadelphia, 11th – 13th of September 2002. [138] With Pavel Simacek, “Role of Simulations in Processing and Control”, Texcomp6, Philadelphia, 11th – 13th of September 2002. [137] With Mathieu Devillard and H.T Hsiao, "On-Line Race-Tracking Characterization And Flow Control In Resin Transfer Molding," 34th ISTC SAMPE, Baltimore, 4-7th of November 2002. [136] With Mathieu Devillard and Kuang-Ting Hsiao"An Approach To Automate Sensing And Control Of Mold Filling In The Resin Transfer Molding Process," 2002 ASME-IMECE, New Orleans, November 17-22th of 2002. [135]. With Correia N and Simacek P, Use of Resin Transfer Molding Simulation to Predict Flow, Saturation and Compaction in THE VARTM Process , 2002 ASME-IMECE, New Orleans, November 17-22th of 2002. [134]. With B. Markicevic, D. Heider, S. T. Holmes, P. Handel,
P. Minguet, and J. W. Gillespie, Jr. “Numerical Investigation of
Mold Filling of a Composite Part with Impermeable Core” 17th Technical
Conference of the American Society for Composites West Lafayette, 2002
[132] With P. Simacek , "Role of Sensors, Simulations and Control in Liquid Molding Processes", 34th International SAMPE® Technical Conference, Baltimore, Nov 2002. [131.] With P.Simacek, "Combining Simulations and Experiments for "Intelligent Manufacturing Process Design," International Symposium on Mechanics of Composites, Prague, Czech Republic, October 14, 2002 [130] With Jeffrey M. Lawrence, Pavel Simacek," Numerical Mold Filling Simulations of Liquid Composite Molding Processes:Applications and Current Issues," 23rd International SAMPE Europe Conference and Tutorials/JEC Paris, France 2002 2001
[128] With J. M. Lawrence, K.-T. Hsiao, R. C. Don and S. G. Advani, “Use of a Design and Control Methodology to Manufacture Complex Composite Parts by Manipulating Flow during Resin Transfer Molding Process,” 46th SAMPE International Symposium and Exhibitions, Anaheim, CA [127]With Roopesh Mathur and Bruce Fink, “Use of Genetic Algorithms
for Injection Gate Selection in Resin Transfer Molding,” American Society
for Composites Sixteenth Technical Conference, September 9-12 2001
[126] With A. Gokce, and K.-T. Hsiao, “A method to find auxiliary injection gate locations for successful mold filling in Resin Transfer Molding Process,” Proceedings of 46th SAMPE International Symposium and Exhibitions, Anaheim, CA. [125] With Roderic C. Don, Gonzalo A. Estrada, and Suresh G. Advani Use of Simulations Sensors and Control Methodologies to Manipulate Flow in Liquid Composites Molding Processes, SAE Aerospace Manufacturing Technology Conference & Exposition, Seattle, WA, September 14, 2001. [124]. With A. Gokce, and K-T. Hsiao, "Gate Location Optimization
in Liquid Composite Molding Processes: The Triagram Method," 2001 International
SAMPE Symposium and Exhibition, Long Beach, California, May 6-10, 2001.
[123]. With Jeffrey M. Lawrence and Pavel Simacek “Simulation of Three Dimensional Flow, Saturation and Heat Transfer in Liquid Composite Molding Processes” Aerospace Congress & Exhibition Seattle, WA, USA, September 11, 2001 [122]. With Pavel Simacek, and Christof Ledermann, "Fast Three Dimensional Numerical Simulation of Isothermal Mold Filling for Liquid Composite Molding Processes," American Society for Composites Sixteenth Technical Conference, September 9-12 2001 [121]. With Jeffrey A. Acheson and Pavel Simacek, "The Role of Compaction and Saturation in Flow During VARTM,", American Society for Composites Sixteenth Technical Conference, September 9-12 2001 [120] Roopesh Mathur, Suresh G. Advani and Bruce K. Fink, "A Sensitivity-based Gate Location Algorithm for Optimal Mold Filling During the Resin Transfer Molding Process", International Conference on Computational Engineering and Sciences , Los Angeles, CA, August (2000). [119]Sozer, E. M., Simacek, P., Advani, S. G., Robitaille, F, Long, A. C. and Rudd, C. D., “Prediction of preform permeability of geometrically modeled woven fabric”, submitted to the special international symposium entitled “Affordable Composites Manufacturing: New Advances in Forming, Stamping, and other Rapid Processing Methods”, the 15th Annual Technical Conference of the American Society for Composites (ASC), at the George Bush Presidential Library (Texas A&M University, College Station, Texas, USA), September 24-27, 2000. [118] With Ali Gokce, "Characterization of Controllability of Flow in Resin Transfer Molding Process", ASME National Heat Transfer Conference, Pittsburgh, August (2000). [117] Sozer, E. M., Bickerton, S., and Advani, S. G., “Use of sensors and simulations for strategic control of liquid composite mold filling process”, submitted in November 1999 to the CMA/SME, Composites Manufacturing and Tooling 2000 Conference and Tabletop Exhibits, Newport Beach, California, February 23-25, 2000. [116] K.-T. Hsiao and S. G. Advani, "Investigation of Heat Transfer during Laminar flow of Incompressible Liquid through Periodic Porous Media," 4th ISHMT/ASME Heat and Mass Transfer Conference, Pune, India, Jan, 2000 [115]Controllability During Mold Filling in Liquid Composite Molding Process, sent to NSF Meeting in Vancouver CA, Jan 2000 [114] Hubert C. Stadtfeld, Suresh G. Advani, and Karl V. Steiner, "RTM at the University of Delaware: ONR AMIPC (Advanced Materials Intelligent Processing Center)", invited presentation given at the Institute for Composite Materials (IVW), Kaiserslautern January 2000, Germany. [113] Sozer, E. M., Chen, B., Graham, P. J., Chou, T.-W., and Advani, S. G., “Characterization and Prediction of Compaction Force and Preform Permeability of Woven Fabrics During the Resin Transfer Molding Process”, Proceedings of the Fifth International Conference on Flow Processes in Composite Materials, 25-36, Plymouth, U.K., 12-14 July 1999. [112] Kueh, S. G. Advani and R. S. Parnas, “Fiber Optic Sensors for Resin Transfer Molding Process,” 12th International Conference on Composite Materials, Paris, France, 5-9 July 1999 [111] Sozer, E. M., Bickerton, B., and Advani, S. G., “Modeling and Control of the Liquid Composite Molding”, Proceedings of the Fifth International Conference on Flow Processes in Composite Materials, 109-124, Plymouth, U.K., 12-14 July 1999. [110] Advani, S.G, E.M. Sozer, S. Bickerton, H. Stadtfeld, and K.V. Steiner, “Use of Sensors and Simulations to Move Towards Automation of the Resin Transfer Molding Process,” 12th International Conference on Composite Materials (ICCM), Paris France, July 1999. [109] Hubert C. Stadtfeld, E. Murat Sozer, Karl V. Steiner and Suresh G. Advani, “Approach towards an automated design environment for the Resin Transfer Molding Process”, Proceedings of the 45th. International SAMPE 2000 Symposium and Exhibition, Long Beach California, May 2000, [108] Pavel B. Nedanov and Suresh G. Advani, Shawn W. Walsh and William O Ballata, “Determination of the Permeability Tensor of Fibrous Reinforcements for VARTM” International Mechanical Engineering Congress and Exposition (IMECE), Atlanta, Nov 1999 [107] Hubert C. Stadtfeld, Simon Bickerton, E. Murat Sozer, Martin Indermaur, Karl V. Steiner and Suresh G. Advani, "On-line Control for Resin Transfer Molding Process", Proceedings of the 15th. Annual meeting of the Polymer Processing Society (PPS15), 'S Hertogenbosch Netherlands, June 1999. [106] Hubert C. Stadtfeld, Simon Bickerton, Karl V. Steiner and Suresh G. Advani, "Multi-line Injection System for On-line Pressure or Flow Rate Control of the Resin Transfer Molding Process", given at the 44th. International SAMPE Symposium and Exhibition, Long Beach California, May 1999. [105] P. Nedanov and S. G. Advani, “Manufacturing Simulations for Aerospace Structures Using RTM Process”, 1998 International Mechanical Engineering Congress & Exposition, Anaheim, California, November, 1998. [104] A. Reinhardt, S. G. Advani, M. H. Santare and F. Miller, “Preliminary In-Vitro Durability Study on Composite Hip Prosthesis Made by Resin Transfer Molding”, 1998 International Mechanical Engineering Congress & Exposition, Anaheim, California, November, 1998. [103] T. S. Creasy and S. G. Advani, “Rheology of Discontinuous Fiber Arrays in Elongation”, 1998 International Mechanical Engineering Congress & Exposition, Anaheim, California, November, 1998. [102] With Simon Bickerton, Hubert C. Stadtfeld, Karl V. Steiner and Suresh G. Advani, "Active control of Resin injection for the Resin Transfer Molding Process", ASC, 13th Technical Conference on Composite Materials, Baltimore, Maryland, Sept. 1998. [101] E. M. Sozer, P. Simacek, and S. G. Advani, "Draping and filling of long axisymmetric molds in RTM process", the Eighth Japan-U.S. Conference on Composite Materials, Baltimore, MD, September 1998. [100] P. Simacek, E. M. Sozer, and S. G. Advani, "Numerical simulations of mold filling for design and control of RTM process," the Annual Meeting of the Society of Plastics Engineers: ANTEC, Atlanta, GA, April 1998. [99] With Sylvia Kueh and Richard S. Parnas, "Virtual Sensor Simulation Study of Flow During Resin Transfer Molding Process", 13th American Society of Composites Technical Conference, Baltimore, September (1998) [98] With Roopesh Mathur and Bruce K. Fink, "Optimization of Channel Design in VARTM Processing", 56th Annual Technical Conference, Society of Plastics Engineers, Atlanta, GA, April (1998). [97] With Roopesh Mathur and Bruce K. Fink, "Optimal Location of Gates and Vents for Resin Infusion Processes Using Genetic Algorithms",1998 American Control Conference, Philadelphia, PA, June (1998). [96] With Jeremiah Slade “Characterization of the Sink Term in Woven and Stitched Preform Impregnation”, 13th ASC Conference, Baltimore, MD (1998) [95] With Mathur Roopesh, Fink Bruce K. "Optimization of Channel Design in VARTM Processing", Society of Plastics Engineers, Annual Technical Conference, Atlanta (1998) [94] With Simacek Pavel, Sozer E. Murat "Numerical simulations of mold filling for design and control of RTM process", Society of Plastics Engineers, Atlanta (1998) [93] With Gillio, Emanuele F.; Gillespie, John W. Jr.; Eduljee, Rushad F.; Bernetich, Karl R.; Fink, Bruce K, “Characterization of Co-injected Vinyl-Ester/Phenolic Interphase,” International Mechanical Engineering Conference and Exposition, Dallas, Texas, Nov. 1997 [92] With Bickerton Simon, “Flow around Corners in Resin Transfer Molding” International Mechanical Engineering Conference and Exposition, Dallas, Texas, Nov. 1997 [91] With Creasy Terry, “Elongational Flow of Long Discontinuous Fiber Composites, International Mechanical Engineering Conference and Exposition, Dallas, Texas, Nov. 1997 [90] With Roopesh Mathur, Bruce K. Fink and Richard S. Parnas, Evanescent Wave Fluorescent Fiber Optic Sensor for Resin Transfer Molding", 29th International SAMPE Technical Conference, Orlando, FLA, October (1997). [89] With Simacek Pavel, “Approximate Temperature Solution During Non-Isothermal Viscous Resin Impregnation in a Stationary Bed of Fibers,” Summer Meeting of ASME Heat Transfer Division, Baltimore, Aug. 1997 [88] With Tim Hsiao, “Heat Transfer in Periodic Porous Media,” Summer Meeting of ASME Heat Transfer Division, Baltimore, Aug. 1997 [87] With Benard Andre, “Simulation of Microstructure Development During the Solidification of Semi-Crystalline Polymers,” Summer Meeting of ASME Heat Transfer Division, Baltimore, Aug. 1997 [86] With Gillio, Emanuele F.; Gillespie, John W. Jr.; Eduljee, Rushad F.; Bernetich, Karl R.; Fink, Bruce K., “Manufacturing Of Composites With The Co-Injection Process,” 38th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference. Kissimmee, FL, USA 4 AIAA, (1997) [85] With Mohan, R. V.; Bickerton, S.; Shires, D.R Tamma, K.K,” Analysis And Characterization Of Flow Channels During Manufacturing Of Composites By Resin Transfer Molding,” 55th Annual Technical Conference, ANTEC. Toronto, Canada, (1997). [84] With Bickerton, Simon; Simacek, Pavel; Pillai, Krishna M.; Mogavero, Jeffrey “Important Mold Filling Issues In Liquid Composite Molding Processes: Modeling And Experiments,” 55th Annual Technical Conference, ANTEC, Toronto, Canada, (1997). [83] With Gallez, Xavier E. “ Resin Infusion Process Simulation (RIPS): A Fast Method For Three Dimensional Geometries,” 55th Annual Technical Conference, ANTEC. Toronto, Canada, (1997). [82] With Sunil Gupte, "Flow of Resin at the Interface of Fibrous Porous Media and a Channel," AIChE Meeting, Chicago, Nov. (1996). [81] With Krishna Pillai "Modeling of Void Migration in Resin Transfer Molding Process " International Mechanical Engineering Congress and Exposition, Atlanta, Nov. (1996) [80] With Terry Creasy, "Extentional flow of a Long Discontinuous Fiber Melt Composite System" International Mechanical Engineering Congress and Exposition, Atlanta, Nov. (1996) [79] With Simon Bickerton and Pavel Simacek, "Investigation of Draping and its Effects on Mold Filling during Manufacturing of a Compound Curve Composite Part, " International Mechanical Engineering Congress and Exposition, Atlanta, Nov. (1996) [78] With Xavier Gallez, " Modeling and Simulation of Liquid Composite Processes," at the Flow Processes in Composite Materials Conference, Wales, U.K., Sept. (1996). [77] With Steve Shuler, " Transverse Squeeze Flow of Aligned Fibers within a Thermoplastic Matrix, " XIIth International Rheology Congress, Quebec City, August (1996). [76] With Jeff Mogavero, "Permeability: A Key to Successful Modeling of the RTM process, International SAMPE Symposium and Exhibition Anaheim, California March (1996). [75] With Andre Benard, "Solidification in Manufacturing" NSF Conference of Manufacturing, University of New Mexico, Jan 1996. [74] With Terry Creasy, "Rheology of Collimated Fabrics" ASME Winter Annual Meeting, San Fransisco, Nov. (1995). [73] With Steve Shuler, "Anisotropy Issues in Sheet Forming of Thermoplastic Fiber Reinforced Laminates," Advanced Composites Conference and Exposition, Dearborn, Michigan , Nov. (1995) [72] With Simon Bickerton, "Effect of Draping of Fiber Preforms on Process Parameters During Manufacturing with Resin Transfer Molding," Advanced Composites Conference and Exposition, Dearborn, Michigan , Nov. (1995) [71] With Pavel Simacek, "Permeability of Woven Fabrics" at the 32nd Annual Meeting of the Society of Engineering Sciences, New Orleans, Oct. 1995 [70] With Ranganathan and Fred Phelan, "A Structure-Based Predictive Model for Permeability in Porous Media," at the 32nd Annual Meeting of the Society of Engineering Sciences, New Orleans, Oct. 1995 [69] With Simon Bickerton, Yves Parseval and Kurt Fickie "Role of Local Permeability Variations in Resin Transfer Molding. Nineth International Conference on Numerical Methods in Thermal Problems, Atlanta July, 1995 [68]. With S. Bickerton, "Characterisation of Corner and Edge Permeabilities During Mold Filling in Resin Transfer Molding," ASME Summer Meeting on Mechanics and Materials (1995). [67]. With A. Benard "Linking Microscopic and Macroscopic Effects during Solidification of Semi-crystalline polymers," Numiform. International Conference on Numerical Methiods, Cornell, June ( 1995). [66]. With Ranganathan-Sridhar, Phelan Frederick R Jr. "Microstructure-permeability predictions for the processing of advanced composites," Society of Plastic Engineers, Boston (1995). [65]. With De Parseval Yves, Valery Roy R., "Effect of local variations of preform permeability on the average permeability during resin transfer molding of composites," Society of Plastic Engineers, Boston (1995). [64] With B. Liu and L. Fong, "RTM with Flexible Mold Walls," Society of Plastic Industries, Cincinnati, Feb. (1995) [63] With S. Gupte, "Transport Processes in Manufacturing with LDV," NSF Conference of Manufacturing," San Deigo, Jan (1995) [62] With Wei Zhang, "Heat Dispersion in Anisotropic Porous Media," ASME Winter Annual Meeting, Chicago, Nov. (1994). [61] With Ram Varma, "Three Dimensional Fillings of Resin Transfer Molding," ASME Winter Annual Meeting, Chicago,Nov. (1994). [60] With S. Ranganathan and F. Phelan , "A Generalized Model for the Transverse Permeability of Aligned Fibrous Media, AIChE Annual Meeting, San Francisco, Nov.(1994). [59] With Ranganathan, S., G. M. Wise, F. R. Phelan, Jr., and R. S. Parnas, "A Numerical and Experimental Study of the Permeability of Fiber Preforms," Tenth ASM/ESD Advanced Composites Conference, Oct. (1994). [58] With Lihwa Fong, "The Role of Drapability of Fiber Preforms in Resin Transfer Molding", Nineth American Society for Composites Technical Conference, Newark, DE. Sept.(1994) [57] With Krishna Pillai, "A Two Layer Model of Permeability in the Unsaturated Flow Regime for a Woven RTM Preform," Nineth American Society for Composites Technical Conference, Newark, DE Sept.(1994). [56] With S. Shuler, R. B. Pipes and M. Santare, "Squeeze flow of laminates composed of aligned fibers within a thermoplastic matrix" Society of Rheology Annual Meeting, Philadelphia, Sept. (1994). [55] With S. Gupte, "Experimental Investigation of Flow at the Edge of a Porous Media and a Solid Wall," Society of Rheology Annual Meeting, Philadelphia, Sept. (1994) [54] With T. Creasy and R. Okine, "Characterization of Elongational Flow of Fiber Filled Systems," Society of Rheology Annual Meeting, Philadelphia, Sept. (1994) [53] With Lihwa Fong, "The role of Dual Permeability in Mold Filling Simulation of Resin Transfer Molding, "International Conference on Composites Engineering, New Orleans, Aug 28-30 (1994). [52] With B. Liu and S. Bickerton "Modeling and Simulation of RTM - Venting and Void Formation," International Conference on Composites Engineering, New Orleans, Aug. 28-30 (1994) [51] With Andre Benard,"Modeling of the Spherulitic Growth in Polymers," American Chemical Society, Polymer Science and Engineering Division, Washington, D.C,August, 1994. [50] With Kelli Burget,"An Experimental Investigation of Fiber-Wall Interactions in Simple Shear Flow," ASME Fluids Meeting, Lake Tahoe, Nevada, June (1994). [49] With Sunil Gupte, "Use of LDA to Measure the Boundary Layer Near a Fibrous Preform," Hen-Tigers Rheology Day, Center for Composite Materials , University of Delaware, Feb 19, (1994). [48] With Kelli Burget, "Fiber Wall Interactions in Shear Flow," Hen-Tigers Rheology Day , Center for Composite Materials , University of Delaware, Feb 19, (1994). [47] With P. Hepola and R. B. Pipes, "A Model for Thermoplastic Pultrusion," Society of Plastic Engineers , Feb 1994 [46] With S. Gupte, "Transport Processes in Manufacturing with LDV," NSF Conference of Manufacturing," Boston, Jan 1994 [45] With P. Hepola and R. B. Pipes, "A Model for Thermoplastic Pultrusion,"25th International SAMPE Technical Conference, Philadelphia, October 26--28, (1993). [44] With S. Ranganathan and M. A. Lamontia, "Consolidation and Void Reduction Model for In-situ Thermoplastic Composites Processing," 25th International SAMPE Technical Conference, Philadelphia, October 26--28, (1993). [43] With K.M.Pillai,T.L.Luce,M.V.Bruschke and R.S.Parnas, "Modeling the Heterogeneities present in Preforms during Mold-Filling in RTM", 25th International SAMPE Technical Conference, Philadelphia, PA, Oct.26-28, (1993). [42] With A. Benard, "A Model for the Spherulitic Growth in Semi-Crystalline Polymers", Proceedings of the Polymer Processing Society North-Atlantic Meeting, Morgantown, WV, Aug. (1993). [41] With M.V. Bruschke, "RTM Simulation: Non-Isothermal Flow and Cure Kinetics for Complex 3-D Shell-Like Structures," Proceedings of the 51st Annual Technical Conference SPE - ANTEC '93, New Orleans, May(1993). [40] With A. Benard, " Non-Isothermal Crystallization of Polymers : Regimes of Coupling", Proceedings of the 51st Annual Technical Conference SPE - ANTEC '93, New Orleans, May(1993). [39] With Sunil Gupte and Pablo Huq. ," Heat Transport in Sedimenting Suspensions," Society of Rheology Annual Meeting, Santa Barbara,CA, Feb. (1993). [38] With Ali Arefmanesh, "Non-isothermal Bubble Growth in Polymeric Foams,"ASME Winter Annual Meeting, Anaheim, CA, Nov. (1992). [37] With C. Y. Chan and A. N. Beris "3-D Hydrodynamic Interactions around Ellipsoidal Particles using Galerkin BEM Approach" AIChE Winter Annual Meeting, Maimi, Nov (1992). [36] With Tom Sadiq and Richard Parnas,"Experimental Investigation of Flow in Resin Transfer Molding," SAMPE Technical Meeting, Montreal, Canada, October (1992). [35] With M. V. Bruschke and T. Luce,"Effective In-plane Permeability of Multi-layered RTM preforms," American Society of Composites, State College, PA, Oct. (1992). [34] With S. Ranganathan, " A coupled Solution of Flow and Fiber Orientation in Radial Flow Geometry," IXth International Congress on Rheology, Brussels, Aug. (1992). [33] With C. Y. Chan and A. N. Beris, "3-D Simulation of Fiber-Fluid Interactions During Composite Manufacturing Using the Galerkin Boundary Element Method," Computer Aided Design in Composite Material Technology III. Conference, Newark, DE May (1992). [32] With S. RoyChowdhury and J. W. Gillespie Jr., "Void Formation and Growth in Thermoplastic Processing" Computer Aided Design in Composite Material Technology III. Conference, Newark, DE, May (1992). [31] With M. Erhun, "Coupling Crystallization Kinetics with the Energy Equation for Semi-Crystalline Polymers, "Polymer Processing Society, New Delhi, India, March (1992). [30] With M. Erhun, "Heat Transfer Effects During Solidification of Semi-Crystalline Materials,"ASME Winter Annual Meeting, Atlanta, Dec. (1991). [29] With C. Y. Chan and A. N. Beris "3-D Hydrodynamic Interactions around Ellipsoidal Particles using A Hybrid Approach" AIChE Winter Annual Meeting, Anaheim, California, Nov (1991). [28] With S. Ranganathan, "Fiber-Fiber Interactions during Flow of Concentrated Suspensions,"at Society of Rheology Annual Meeting, Rochester, New York, Oct. (1991). [27] With M. Bruschke, "On the Use of Capillary Model to Describe flow Across a Bed of Aligned Fibers," Polymer Processing Society, Hamilton, Canada, April (1991). [26] With Suranjan RoyChowdhury, "Characterization of Consolidation in Thermoplastic Composites," Structures, Structural Dynamics and Materials Conference, Baltimore, MD, April (1991) [25] With M. Bruschke "RTM: Filling of Complex Three Dimensional Shell like Structures," Society of Plastic Industries 47thAnnual Conference, Washington, D.C., (1991) [24] With Ali Arefmanesh, "Dynamics of Bubble Growth in Viscoelastic Polymeric Foams, ASME Winter Annual Meeting, Dallas, Dec. (1990). [23] With Sridhar Ranganathan, "Fiber Orientation of Semi-Concentrated Suspensions in Homogeneous Flows, " 43rd Annual Meeting of American Physics Society, Division of Fluid Mechanics, Cornell, Nov (1990) [22] With Ali Arefmanesh,, "Diffusion Induced Growth of a Gas Bubble in a Maxwell Fluid" 43rd Annual Meeting of American Physics Society, Division of Fluid Mechanics, Cornell, Nov (1990) [21] With C. Y. Chan and A. N. Beris "Simulation of 3-D Hydrodynamic Interactions around Ellipsoidal Particles using Higher Order Boundary Element Techniques," AIChE Winter Annual Meeting, Chicago, Illinois, Nov (1990). [20] With C. L. Tucker "Closure Approximation for Structural Tensors" at Society of Rheology, 3rd Annual European Conference, Edinburgh, U.K.,September (1990). [19] With C. Y. Chan and A. N. Beris "Simulation of 3-D Hydrodynamic Interactions around Ellipsoidal Particles using Higher Order Boundary Element Techniques," B. Tech 90, 5th International Conference on BE Technology, Newark, Delaware, July(1990). [18] With M. Erhun "Use of BEM to Model Heat Flow during Crystallization of Polymers" B. Tech 90, 5th International Conference on BE Technology, Newark, Delaware, July(1990). [17] With M. V. Bruschke, "Mold Filling of Generalized Newtonian Fluids in Anisotropic Porous Media," AIAA/ASME Heat Transfer, Seattle, Washington June 18-20 (1990). [16] With C. Plazaola and A. Ruebin "Flow Analysis in a Miniature Extrusion Die for IC Assembly," at Society of Plastic Engineers, 48th Annual Technical Conference, New York, New York, May (1990). [15] With M. V. Bruschke, "Flow of Generalized Newtonian Fluids in Anisotropic Porous Media," Polymer Processing Society, Nice, France April 17-20 (1990). [14] With M.V. Bruschke, "A Finite/Element Control Volume Approach to flow in Anisotropic Porous Media," ASME Winter Annual Meeting, San Francisco, Dec. 10-15 (1989). [13] With A. Arefmanesh and E. E. Michaelides, "A Parametric Study of Bubble Growth in Low Pressure Foam Molding " ASME Winter Annual Meeting, San Francisco, Dec. 10-15 (1989). [12] With M. Erhun "A Numerical Study of Heat Flow During Crystallization," ASME Winter Annual Meeting, San Francisco, Dec. 10-15 (1989). [11] With C. Altan, R. B. Pipes and S. Guceri, "An Integral Solution Technique for Fiber Orientation States in Flowing Suspensions," at Society of Rheology Annual Meeting, Montreal, Canada, Oct. (1989). [10] With C. Y. Chan and A.N. Beris "Use of Boundary Element Method to Simulate Hydrodynamic Interactions around Ellipsoids in 3-D Flow Fields," at Polymer Processing Society Summer Meeting, Ahmerst, Massachusetts, Aug. (1989). [9] With M. V. Bruschke "A Numerical Simulation of the Resin Mold Filling Process" at Society of Plastic Engineers, 47th Annual Technical Conference, New York, New York, May (1989). [8] With A. Arefmanesh and E.E. Michaelides "A Numerical Study of Bubble Growth during Low Pressure Structure Foam Molding Process" at Society of Plastic Engineers, 47th Annual Technical Conference, New York, New York , May (1989). [7] With Rob Davis and C.L. Tucker "Fiber Orientation in Injection Molding: Predictions and Experiments," Polymer Processing Society, 4th Annual Meeting, Orlando, Florida, Sept. (1988) [6] With C. L. Tucker "A Numerical Simulation to Predict Fiber Orientation in Thin Compression Moldings" at Society of Plastic Engineers, 46th Annual Technical Conference, Atlanta, Georgia, May (1988). [5] With C. L. Tucker, "Processing and Structure of Short Fiber Composites," at 14th Conference on Production Research and Technology, Ann Arbor, Michigan, Oct. (1987) [4] With Tim Osswald and C. L. Tucker, "Processing -Structure Predictions for Short Fiber Composites," at 13th Conference on Production Research and Technology, Gainesville, Florida, Oct. (1986) [3] With C.L. Tucker "A Tensor Description to Predict Fiber Orientation" at Polymer Processing Society, 2nd Annual Meeting, Montreal, Canada, April (1986). [2] With C.L. Tucker "A Tensor Representation of Fiber Orientation in Short Fiber Composites" at Society of Plastic Engineers, 43rd Annual Technical Conference, Washington D.C. , April (1985). [1] With D. Dolan, " A Vision Based Robot System", ROBOTS -8 Conference,
Detroit, Michigan, June (1984).
|
|
|
|
|